Tuesday, November 20, 2012

index» » FORD LATERAL CONTROL ROD AXLE BRACKET INSTALLATION

FORD LATERAL CONTROL ROD AXLE BRACKET INSTALLATION

FORD LATERAL CONTROL ROD AXLE BRACKET INSTALLATION
FORD LATERAL CONTROL ROD AXLE BRACKET INSTALLATION
1. Remove and discard the OEM shock absorbers, but retain the mounting fasteners (bolts &
nuts) for re-use.
2. Remove the top d-bushing mount bolts and disconnect the axle breather tube (See Figure 2-
1).
3. If the truck is equipped with an S110 4.25” X 4.25” square axle (most F450s and F550s), install both axle spacer tabs on the axle bracket using (4) 1/2 x 1 1/4 UNC FLANGE BOLTS and (4) UNC TOP LOCK FLANGE NUTS. (See Figure 2-2).
4. Loosely fasten the axle bracket to the axle as shown in Figure 2-3 using (2) M12 x 1.75 x 40
METRIC BOLTS and (2) 1/2” WASHERS.
5. Reconnect the axle breather tube to the axle.
doenload here